You are here:
  1. Home
  2. Shop
  3. الصفحة 2

المتجر

Filters

عرض 13–24 من أصل 81 نتيجة

Radiators

SAFETY
MODEL BASIC SMART LUX ARTIC
TEST PRESSURE BAR 8 8 10 14
WORK PRESSURE BAR 6 6 8 10
THICKNESS mm 1 1 1,25 1,4
CONVECTOR BELT FULL FULL FULL
22K – 600 -1000 ∆T 60 (90-70-20) WATT 1881 2318 2318 2318
22K – 500 -1000 ∆T 60 (90-70-20) WATT 1914 1914 1914 1914

مجموعة برابيش دوش

Exclusive shower hose SNAKE, with PVC undercoating and textile coating with spyral effect, with crystal PVC undercoating, transparent and atoxic. Model with registered design, a brand new item for your shower. SHOWER HOSE SNAKE made of: - undercoating in atoxic PVC with textile coating; - protection layer in crystals of atoxic PVC; - brass fittings with stainless steel sleeves (aisi 304); Working temperature: up to 50°C. Working pressure: up to 6 bar. Burst pressure: 10 bar.

شطاف كروم

Codes and dimensions
STAINLESS STEEL: STAINLESS STEEL CHROME CONNECTION
SPYRAL: CHROME CHROME CONNECTION
SHINE: CHROME CHROME CONNECTION
RIDDLE: CHROME CHROME CONNECTION
GRAY: CHROME CHROME CONNECTION
COVER: CHROME CHROME CONNECTION
NYL – SIL: GREY/CHROME CHROME CONNECTION

Braided hoses

Flexible hoses for hydraulic connections with EPDM undercoating and stainless-steel braid, complete with brass connections for sinks, pumps, water heater, boiler and surge tank… Codes and dimensions
lnner Hose : EPDM Rubber, DN8, DN13, DN19 & DN25
Outside braiding : Stainless-Steel with Italian flag
Fittings : CW614n brass
Sleeves : Stainless-Steel
Temperature : 5oC – 90oC
Length : 10 – 200cm
Working pressure : 10 Bar

MAGIKONE 1″ x ø 32 mm

Data Sheet
Tech specs BI-POWER washers / with rosette
Product specification description 1″ x ø 32 mm
Material 1 PP
Material 2 ALUMINUM
Logistics Information
Piece weight(Kg) 0,00096
Carton quantity 50
Carton volume (m3) ,05002
Quantity on pallet 42

PE-Xb/EVOH

PEX, in particular the B-type silane PEX in SESTA pipes, is a polyethylene derivative in which certain hydrogen atoms are replaced by chemical groups that bind the polymer macromolecules together in a process called cross-linking. Thus, whereas in polyethylene with increasing temperature the polymer chains can flow with each other and the product becomes deformable, in PEX this flow is not possible and the product remains stable. EVOH (ethylene vinyl alcohol) is a copolymer that, even in very thin thicknesses, prevents the passage of oxygen and other gases. Coupled with PEX, it does not allow oxygen to enter the pipes and thus prevents sludge from forming and reduces the possibility of corrosion in metal equipment in heating and refrigeration circuits. The SESTA PE-Xb/EVOH/PE-Xb multilayer pipe consists of 5 layers: PEX inside and outside bonded by two special adhesive layers to an EVOH intermediate layer. This pipe guarantees a high level of mouldability, complete oxygen barrier, total hygiene and absolute corrosion resistance. The SESTA oxygen barrier hose can also be produced with three layers, respectively PEX, adhesive, EVOH. The characteristics are identical to those of the five-layer hose, however, the outer EVOH layer tends to deteriorate in contact with moisture. Codes and dimensions
Dimensions Rolls Pallet Layers
16X2 240/600 m 1680/2400 m 5
17X2 240/600 m 1680/2400 m 5
20X2 240/500 m 1680/2000 m 5

PE-RT/EVOH

PE-RT (Polyethylene of Raised Temperature) is a polyethylene derivative in which certain hydrogen atoms are replaced by chemical groups that make it more difficult for the polymer macromolecules to slide. Thus, whereas in polyethylene with even fairly modest increases in temperature the polymer chains can flow with each other and the product becomes deformable, in PE-RT this flow is only possible at a much higher temperature. EVOH (ethylene vinyl alcohol) is a copolymer that, even in very thin thicknesses, prevents the passage of oxygen and other gases. When coupled with PE-RT, it does not allow oxygen to enter the pipes and thus prevents the formation of sludge and reduces the possibility of corrosion in metal equipment in heating and refrigeration circuits. The SESTA PE-RT/EVOH/PE-RT multilayer pipe consists of 5 layers: PE-RT on the inside and outside bonded by two special adhesive layers to an EVOH intermediate layer. This pipe guarantees a high level of mouldability, complete oxygen barrier, total hygiene and absolute corrosion resistance. The SESTA oxygen barrier pipe can also be produced with three layers, respectively PE-RT, adhesive, EVOH. The characteristics are identical to those of the five-layer pipe, however, the outer EVOH layer tends to deteriorate in contact with moisture. Codes and dimensions
Dimensions Rolls Pallet Layers
16X2 240/600 m 1680/2400 m 5
17X2 240/600 m 1680/2400 m 5
20X2 240/500 m 1680/2000 m 5

عرض 13–24 من أصل 81 نتيجة